Creating your Ideal and Future State Value Stream Map

Having created your current state value stream map we move onto the more difficult task of creating an Ideal state map and your future state value stream maps. Your Ideal state value stream map is the ultimate goal of your improvement process and provides you with an objective to work towards, the future state map is your plan for the next two to three months; you define what you would like to improve and plan to achieve it within the timescale.

This article follows on from our step by step guide on creating a value stream map and describes how value stream mapping or VSM can be used to drive improvement within an organization.

We are going to run through;

  • Why do we need an Ideal State VSM
  • How to create an Ideal state VSM
  • Ideal state Value Stream Map Example
  • Future state value stream map
  • Moving from Current state to Ideal State

 

You can download a free presentation for creating your VSM which can be used in conjunction with what is written here:

Future State Value Stream Map Presentation PPT

Future State Value Stream Mapping Presentation PDF

 

Why do we need an Ideal State VSM

 

Your Ideal state value stream map is exactly what it says; the absolute ideal for your process. It forms a shared vision of what your value stream mapping team is trying to achieve. It should be created by the team with guidance from the facilitator and the senior management, it should be challenging, even to the point of today appearing impossible; but like eating the elephant we will get there one mouthful at a time.

 

How to create an Ideal state VSM

 

You ideal state value stream map really needs the guidance of someone who if familiar with the principles of lean manufacturing and how many other companies implement them. Our process must focus on value as defined by the customer, and all other steps should be removed or minimized as much as possible. We must identify how that value flows through our value stream and this may require more detailed process mapping of parts of our value stream. Then we must make sure that the value can flow without delays and obstacles. By this point we should have moved to the point where individual tasks are located closer to each other without huge piles of inventory between them. Then we look to implement pull at the demand of the customer using simple kanban systems.

 

Ideal state Value Stream Map Example

Current state value stream map

 

 

 

This is our current state value stream map that we created in our step by step guide.

 

 

 

 

 

Ideal State Value Stream Map

 

This is my suggestion for an ideal state, a single work cell comprising of all of the various operations, taking supplied product from a “supermarket” using a kanban system; the supplier replenishing daily also through kanban. The cell feeds a another supermarket where the shipping personnel pick the required product for the customer on a daily basis. A very simple system without the need for scheduling every operation and minimizing inventory.

 

 

 

Future state value stream map

 

Your future state value stream map is in an interim stage between your current state map and the ideal state that is your goal for the whole exercise. You use your current state map to identify the areas of concern that need to be improved over the coming months and you set targets for your change.

These changes typically include;

  • Reduce Cycle Time
  • Reduce setups / reduce batches
  • Improve quality performance
  • Change delivery schedules
  • Implement kanban

 

Future State Value Stream Map

 

You would annotate these changes on your map using the kaizen burst icon as well as updating the target value that you would want to achieve, for instance reducing change over time from 20 minutes to 10 minutes.

Make as many changes as you can comfortably make within a 2-3 month period and support what you want to achieve with detailed action plans as required to keep things on track.

At the end of your project period your future state map will become your new current state and you can then plan the next series of changes.

 

 

 

Moving from Current state to Ideal State

 

Value Stream Mapping

 

 

Typically you would need to have several interim future state maps before you managed to reach your ideal state map, you cannot rearrange your shop floor overnight to create work cells before you first tackle issues such as long change overs, poor quality performance and so on. These things take time to implement and for people to settle into new ways of working.

 

 

 

The likely hood is that as you move through each iteration of your map that you will uncover more and more issues that will require solving, issues such as machine reliability, unofficial rework and many other things are typically hidden by the inventory within the system and as you begin to remove that inventory you will uncover these rocks trying to sink your progress. After each project cycle recollect process data to confirm improvements and to highlight these “new” problems.

 

I hope that this has helped you to better understand how to go from your current state, through various future state maps to reach your ideal state VSM. If you have any comments or questions please leave them below.

 

 

4 comments for “Creating your Ideal and Future State Value Stream Map

  1. Luke
    December 3, 2015 at 12:08 am

    I’m running a project currently that requires an Ideal State map. When guiding people through this, how good should the Ideal State be? It’s a difficult question to answer without a lot of context, but I could see the group “oversimplifying” the exercise into an impossible 2 step process. Which isn’t a bad thing, but it might make make the Ideal State seem like a waste of time. How do you usually handle this?

    • leanman
      December 6, 2015 at 11:48 am

      Hi Luke,
      Personally I would make the ideal state map as good as it possibly could be. Look at what “perfection” would be for your process and then decide what could be done to reach that ideal state. Without knowing the process etc it is hard to advise exactly what you should be doing. But you should ask yourself what is actually required to reach that ideal state – does it mean having introduced SMED to have smaller batches to enable single piece flow or smaller batches with associated kanbans, would you need to make improvements to machine reliability through TPM, do you need to commission smaller dedicated machines, do you need to move the process machinery, train people, etc.. Often there are a huge number of steps that you will need to go through to achieve your ideal state, and some steps may need a significant investment or changes in how the business works. There may also be restrictions that just cannot be overcome at the current time, such as layout changes that you would like but are not feasible within the building you own.
      Your ideal state map should trigger a discussion to plan out exactly how you can reach that state with the associated plan. It may also trigger the discussion about where you hope to get to in the next week/month/year if there are significant changes that are required. Sometimes however it can just result into a visit to the shop floor by a bunch of dedicated individuals with a fork truck and 24 hours to spare resulting in the achievement of what is seen as the ideal state.
      Then of course you may wish to challenge the ideal state – are you really making what the customer wants, when they want it, where they want it?

  2. Todd Atkins
    September 7, 2016 at 2:44 pm

    We are working on a Value Stream Map for an assembly process and wondering at what point to capture our inventory number. Is the inventory to include WIP and raw at point of use of just WIP?

    • leanman
      September 21, 2016 at 5:34 am

      Hi Todd

      The number should be the total amount of stock held at that process. If you want to separate raw materials and WIP then that is fine. Remember though that what ever you measure needs to be meaningful and able to help you with improving the process and highlighting where the issues are. There are few if any solid rules when mapping as things are often very different between different processes. Do what is right for your process.

Leave a Reply to Todd Atkins Cancel reply

Your email address will not be published. Required fields are marked *

*